RL, RLC, RLV Type Three (3) Lobes Roots Blower

Recommended pressure operating range: 1,000 ~ 8,000 mmAq
ADOPTED WITH 3 LOBES ROTOR NEW DESIGN, MAKE THE EFFICIENCY EVEN HIGHER.
Bore size : 40 mm(1-1/2") ~ 300 mm (12")

● Maxi. Pressure: 10,000 mmAq (1.0 kG/cm2)
● Maxi. Vacuum: -6,700 mmAq
DOUBLE STAGE INSTALLATION:
● Maxi. Pressure: 15,000 mmAq (1.5 kG/cm2)
● Maxi. Vacuum: -8,100 mmAq

● RL type: Oil Lubrication for Gear Box, Front Bearing and Rear Bearing.

ADVANTAGE OF 3 LOBES’ ROTOR DESIGN
Owing to the new three (3) lobes’ rotor design, the reverse flow pressure variation period is only 2/3 of that of a conventional 2 lobes’ rotor, the peak pressure is also lower. So the noise and pressure pulsation is greatly limited.
# Less backflow, steady air flow rate, lower vibration, and noise.
# Discharge pressure pulsation is reduced, so lighter loading of bearings and timing gears ensures long servicing life.
# Adequate clearance between the rotors and the rotors with the casing ensures no contact during operation, and this makes the efficiency even higher.
# The rotors are dynamically balanced in the fabrication stage already, so these rotors are almost free from vibration.

SPECIFICATION:

BoreBare ShaftComplete set (RLC)Complete Set (RLV)
(mm)(inch)Blower BodyPressure Operation PackageVacuum Operation Package
401-1/2"RL-50RLC-40-
502"RL-50RLC-50RLV-50
652-1/2"RL-65RLC-65RLV-65
803"RL-80RLC-80RLV-80
1004"RL-100RLC-100RLV-100
1255"RL-125RLC-125RLV-125
1506"RL-150RLC-150RLV-150
2008"RL-200RLC-200RLV-200
25010"RL-250RLC-250RLV-250
30012"RL-300RLC-300RLV-300

RLC type Complete Set Roots Blower with Standard Accessories:

No.Name of AccessoryNo.Name of Accessory
1Blower Body8T-type Reducer
2Four(4) Poles Motor [Optional]9Pressure Safety Valve
3Blower Pulley10Check Valve
4Suction Silencer Set (with air filter and cover)
11Ball Valve
5V-belt [Optional]12Pressure Gauge
6Belt Cover13Gauge Pipe
7Base Plate--

RLV type Complete Set Roots Blower with Standard Accessories:

No.Name of AccessoryNo.Name of Accessory
1Blower Body6Belt Cover
2Four(4)Motor [Optional]7Base Plate
3Blower Pulley1490 degree elbow
4Discharge Silencer Set (with air filter and cover)15Vacuum safety valve
5V-belt [Optional]16Suction Filter Tank(with Vacuum Gauge)

Order Enquiry Form

Contact form description text

  • 2 + 60 =